FAQ - Configuring Charging Stations with Dealer Toolbox FAQ - Custom OCPP configuration keys FAQ - Document describing OCPP j1.6 messages supported by Enelion Lumina charger FAQ - Downloading Logs from Enelion Chargers FAQ - Error F03/05 on Charger FAQ - Instruction where to find charger’s serial number FAQ - Latest Software FAQ – Ethernet Connectivity in the Lumina Charger FAQ – Service Request : How to Proceed Standby Power Consumption of Charger Technological Changes in Enelion Products - coming soon White Paper - Application of CAN Bus for Wired Connection of Enelion Lumina Chargers and Enelion Energy Guard White Paper - Application of RCD B with automatic reclosing device in Enelion stations White Paper - Charging using an OCPP-connected charger while disconnected from the server White Paper - Charging using an OCPP-connected charger while disconnected from the server White Paper - Connecting Enelion Lumina Stations to the OCPP Backend System White Paper - Dynamic Load Balancing in Enelion Chargers White Paper - Error codes in Lumina White Paper - How can the Enelion Vertica station meet the objectives of the EU AFIR regulation? White Paper - How to charge your car from solar panels using EEG 3.0? White Paper - Management of the available charging current remotely based on the connection load value White Paper - Remotely changing the number of used phases in Lumina charger White Paper - Technical Glossary of Enelion Terms White Paper - Use of the 230V socket at the Enelion Lumina station White Paper - Use of the ethernet function in Lumina chargers