White Paper - Remotely changing the number of used phases in Lumina charger
Version 1, 2024-03-20 Autor: Filip Hancke Introduction This document provides instructions for remotely setting the number of phases used by a Lumina charger. This can be achieved either by using Modbus protocol, or by using OCPP’s Charging Profile. Setup and limits Configuration needed In order to d…
White Paper - Charging using an OCPP-connected charger while disconnected from the server
Author: Klaudia Kostogłód 12.12.2023 The station's communication with the server via OCPP 1.6 brings many benefits and streamlines the charging and station operation process. However, if the connection to the server is lost, the user may lose the ability to charge. The purpose of this document is to present…
White Paper - Management of the available charging current remotely based on the connection load value
Version 1, 2024-02-06 Author: Klaudia Kostogłód Introduction With the rapid growth of the electric car market, power management issues at chargers are becoming increasingly important. The efficiency of the charging process, the optimal use of the available power and the speed at which the vehicle is charged ar…
White Paper - Charging using an OCPP-connected charger while disconnected from the server
Version 2, 12 gru 2023 Author: Klaudia Kostogłód The station's communication with the server via OCPP 1.6 brings many benefits and streamlines the charging and station operation process. However, if the connection to the server is lost, the user may lose the ability to charge. The purpose of this document is…
FAQ - Document describing OCPP j1.6 messages supported by Enelion Lumina charger
Version 1, 2024-06-09 Author: Filip Michalski Messages Configuration keys Accepted - keys that can be read or written (if possible) by getConfiguration.req Implemented - keys that are changing behavior of the EVSE MeterValues
White Paper - Connecting Enelion Lumina Stations to the OCPP Backend System
Introduction Connecting a charging station to a backend system using OCPP (Open Charge Point Protocol) allows remote monitoring and management of the charging process. OCPP is a standardized communication protocol that provides a common interface for backend systems. As a result, operators of charging stations can t…
FAQ - Custom OCPP configuration keys
Part of the user configuration (the one changed with a configuration panel), apart from OCPP configuration keys, can be changed with OCPP ChangeConfiguration command. The list of supported keys is in the table below :
