White Paper - Use of the 230V socket at the Enelion Lumina station
Author : Klaudia Kostogłód Ver 1, Introduction The purpose of this documents is to provide instructions for the use of the 230V socket on the Enelion Lumina charger. The 230V socket is an optional accesory for the station and allows you to power a single-phase appliance such as a lawn mower or electri…
White Paper - Use of the ethernet function in Lumina chargers
Version 1, 2023-10-20 Author: Klaudia Kostogłód Introduction To expand the communication capabilities of Enelion Lumina chargers, a wired Internet connection option has been added. The Ethernet connection is a widely used wired Internet connection in both industrial and residential settings.. The topic of…
White Paper - Technical Glossary of Enelion Terms
Below is a glossary of technical terms used in Enelion documentation : 1. ESLM Enelion Smart Load Management - Enelion's proprietary system for balancing energy during the charging process between charging points. It includes Enelion Energy Guard and Enelion DLB. 2. Plug & Charge In the manuals for the 2.0 …
White Paper - How to charge your car from solar panels using EEG 3.0?
Gdańsk, 4 paź 2023 Autor: Klaudia Kostogłód Introductory Information: ● The household power supply cannot be limited. ● The solar panel-generated current is used first. If electricity is being generated by the solar panels, it will be consumed by the household first. If the household does not require i…
White Paper - Remotely changing the number of used phases in Lumina charger
Version 1, 2024-03-20 Autor: Filip Hancke Introduction This document provides instructions for remotely setting the number of phases used by a Lumina charger. This can be achieved either by using Modbus protocol, or by using OCPP’s Charging Profile. Setup and limits Configuration needed In order to d…
White Paper - Management of the available charging current remotely based on the connection load value
Version 1, 2024-02-06 Author: Klaudia Kostogłód Introduction With the rapid growth of the electric car market, power management issues at chargers are becoming increasingly important. The efficiency of the charging process, the optimal use of the available power and the speed at which the vehicle is charged ar…
White Paper - Application of CAN Bus for Wired Connection of Enelion Lumina Chargers and Enelion Energy Guard
Introduction Controller Area Network (CAN) is a communication standard used in the industry. CAN is a communication protocol that allows different devices or modules in a system to exchange data efficiently and reliably. It is used for managing and monitoring devices such as engines, control systems, sensors, and ma…
White Paper - Connecting Enelion Lumina Stations to the OCPP Backend System
Introduction Connecting a charging station to a backend system using OCPP (Open Charge Point Protocol) allows remote monitoring and management of the charging process. OCPP is a standardized communication protocol that provides a common interface for backend systems. As a result, operators of charging stations can t…
FAQ - Instruction where to find charger’s serial number
Each serial number is written down in format: XXXX-XXXX. Example serial number is marked in red frame seen below. Enelion Stilo chargers serial number is located from the side at the bottom. Wallbox type chargers, the serial number is located under the device at the right side. It is readable without d…
